Shen ChangHong Definition and scope of application
This method uses DPD spectrophotometry to determine the total chlorine in residual chlorine.
This method is applicable to the determination of free residual chlorine in drinking water and its source water, and the determination of free residual chlorine and various forms of combined residual chlorine in drinking water and its source water after chlorination and disinfection.
The detection limit of this method is 0.04mg/l and the upper limit is 20.0mg/l.
principle
DPD reacts rapidly with free residual chlorine in water to form red compounds; under the catalysis of iodide, the combined chlorine can react with DPD to develop color, so as to measure the total chlorine, which is determined by colorimetry.
The test method of total chlorine in residual chlorine developed by Shenzhen Changhong Technology Co., Ltd. (hereinafter referred to as "shenchanghong") is simple, rapid and economical in operation, with accurate and reliable test results. Shenchanghong can provide a complete analysis scheme of total chlorine in residual chlorine test method, and users do not need self-made reagents. The scheme includes a residual chlorine total chlorine detector, a complete set of residual chlorine total chlorine reagents, etc. The residual chlorine reagent is used together with the residual chlorine analyzer. The analytical procedure is simple and convenient, which meets the requirements of the national industry standards.
Product features:
There is no need to prepare residual chlorine reagent: the reagent prepared by a certain proportion of chemical components required for residual chlorine analysis can greatly save the preparation time of residual chlorine reagent;
● time saving: the whole analysis process, including water sampling, colorimetric determination and other steps, takes much less time than traditional methods;
● simple operation and easy to learn: the operation guide with pictures and texts is convenient for mastering the analysis method of total residual chlorine in a short time.
Analysis steps of total chlorine in residual chlorine of shenchanghong:
(1) Preparation of residual chlorine reagent and water sample
Put the reagent required for the analysis of total chlorine containing residual chlorine into each residual chlorine colorimetric tube, add a proper amount of water sample according to the instructions, and then tighten the bottle cap.
(2) Residual chlorine colorimetric determination
Shenchanghong's residual chlorine tester (chcl-220 / chcl-222 / mulp-8a / C / D / pmulp-4c / 8C / mulp-4b / gw-2000, etc.), select the corresponding residual chlorine test program in the main menu, without re establishing the standard curve, just put the residual chlorine reagent test tube in the instrument to read the residual chlorine total chlorine value expressed in concentration units, and save the record results.
Brief introduction of the residual chlorine analysis system of shenchanghong
The total chlorine analysis system provided by shenchanghong includes the main machine of the total chlorine analyzer and the auxiliary total chlorine reagent.
(1) Instrument host: according to the needs of different customers, shenchanghong company can provide a variety of models of residual chlorine total chlorine tester for the determination of residual chlorine total chlorine.
