Shen ChangHongShen ChangHong

To be a supplier of high quality
laboratory analytical instruments in China.

中文 / English

0086-0755-26450374 / 17748681632@163.com

Technical & Business Support: 8:30-18:00 every day

Three Steps to Quickly Determine Your Testing Focus In Water Quality Parameters

2026-10-31 14:34:33        0

Three Steps to Quickly Determine Your Testing Focus In Water Quality Parameters

You don’ t have to pick testing parameters blindly when analyzing water quality, but you also shouldn't expect to lock down every compliance parameter in just three steps. Asking yourself three questions before testing can quickly narrow down the scope and help you avoid unnecessary detours.

1. What is the water used for? —— Usage Determines the Standard

 

Direct drinking water, daily washing, fish farming, agricultural irrigation, and wastewater discharge all have completely different regulatory standards. This step decides "which standard to use for compliance evaluation," rather than "only testing a few specific items."

• Drinking Water: Under GB 5749-2022, there are 43 routine parameters, including 3 microbiological parameters, 18 toxicological parameters, 16 sensory and general chemical parameters, 2 radioactive parameters, and an additional 4 disinfectant parameters.

• Fishery Water: Under GB 11607, the focus is on pH and dissolved oxygen. Parameters not covered (such as ammonia nitrogen) refer to GB 3838.

• Agricultural Irrigation: Under GB 5084, basic control parameters include pH, total salinity, chlorides, heavy metals, fecal coliforms, and roundworm eggs.

• Wastewater Discharge: Characteristic pollutants are determined by industry discharge standards and pollution discharge permits. Drinking water standards cannot be applied here.


2. What type of water source is it? —— Source Determines Risk Focus

 

Municipal tap water, well water, bottled water, river/lake surface water, and water purifier outlets all come with different inherent risks. The water source type determines whether you need to add characteristic risk parameters on top of the standard routine items. For instance, well water requires extra attention to microorganisms and nitrates; surface water requires focus on turbidity and organic matter; and water purifier outlets need verification to ensure the filtration process hasn't introduced new issues (such as silver or iodine).

3. Are there any water quality anomalies or specific concerns? —— Anomalies Determine Characteristic Parameters

 

This step selects "characteristic parameters," which cannot replace the routine parameters required by the standards:

• Heavy scale when boiling water: Test for Total Hardness; Total Dissolved Solids (TDS) and sulfates can also serve as references.

• Bleach-like chlorine smell: Test for Residual Chlorine. As a disinfection indicator, residual chlorine is not a case of "the lower, the better," nor should it be the only thing tested just because there is an odor—its purpose is to confirm whether disinfection was sufficient and whether bacterial inhibition is maintained during pipeline distribution.

• Yellowish water or rusty smell: Test for Iron and Manganese. These are sensory and general chemical parameters, which are not directly equivalent to "toxicological heavy metal parameters."

• Long-term drinking concerns regarding heavy metals: You cannot just test for lead, arsenic, cadmium, and copper. In GB 5749, toxicological heavy metal parameters include arsenic, cadmium, lead, mercury, hexavalent chromium, antimony, barium, beryllium, and nickel. Copper, zinc, iron, manganese, and aluminum belong to sensory and general chemical parameters; the nature of their risks is different.

• Gastrointestinal discomfort from open-water sampling: In drinking water scenarios, the routine microbiological parameters are Total Plate Count, Total Coliforms, and Escherichia coli (E. coli). These three have a layered screening relationship: Total Plate Count reflects overall hygiene, Total Coliforms raise an alarm for fecal contamination, and E. coli confirms recent fecal contamination. Simply stating "coliforms" is not accurate enough.

 

Conclusion

 

You don't need the most expensive full-suite testing package, but don't mistake a "three-step preliminary screening" for a "full compliance test." The correct approach is: usage determines the standard, water source determines the risk focus, and anomalies determine the characteristic parameters. These three steps help narrow down your scope and ensure your money is spent where it matters most.

The final testing list should be based on the corresponding standard's "routine parameters + necessary characteristic parameters." When in doubt, consult a qualified testing institution. Preliminary screening solves the question of "which direction to test," while standards solve the question of "whether the testing is complete and compliant."